Ensure that the output of the sand production line starts from the installation

To ensure the production efficiency of the sand production line, we must start from the installation. If the sand making machine is improperly installed in the sand production line, it will affect the output of the entire production line, so how to install correctly and how to install it can be more efficient. The role of the sand making machine in the gravel line is the * concerned issue for many sand and stone manufacturers.

Depending on the location of the crushing site, the installation location of the sand production line will vary, typically in a factory or in an open field. Before the stone crushing equipment is installed:

1. First, check the packing list according to the packing list to check whether the various parts are worn or not during transportation.

2. When installing, the new sand making machine should be leveled so that its main axis is perpendicular to the horizontal plane. Appropriate space should be left on both sides and sides of the new sand making machine for hoisting and maintenance;
3. After the installation is completed, a full inspection should still be carried out, for example: whether the lubricating oil pipe is firmly connected;

4. The sand production line equipment must be re-added once before the test run, and check whether the connection between the parts is firm and reliable, whether there is any foreign matter on the impeller, and whether the motor wiring is correct;

5. After the operation, if there is any abnormality, the operation should be s*ped immediately. This installation method can *ly improve the production efficiency of the sand making machine in the sand production line.