Cone crusher maintenance and maintenance need to pay attention to what

The cone crusher is a star product in mining equipment. It is suitable for crushing various ores and rocks with medium hardness and above. It is widely used in sand crushing and other industries. Cone crusher, like other equipment, also needs your careful maintenance. Below, Jiaoxin Zhongxin will introduce you to the daily maintenance knowledge of cone crusher.

In the process of using the device, the user should * operate according to the operating instructions according to the operating instructions, which not only reduces the failure rate of the device, but also is responsible for the personal safety of the operator. In addition, there are several aspects that should be noted.

1. Carefully inspect the external parts of the equipment, such as the valve plate, bonnet, valve seat, etc. of the crusher, and clean or repair these parts in time.

2. Detailed inspection of the cone crusher safety valve, pressure regulator and air distribution device to ensure the safe operation of the equipment during the production process and to relieve the personal safety threat to the operator.

3. Carefully inspect the bearings of each part of the crusher to ensure that the bearings are lubricated without damage. If problems are found, immediate maintenance measures should be taken.

In addition to the daily inspection and maintenance work described above, the cone crusher should be regularly inspected and found before the equipment problems, and the "failure" is killed in the bud. Users should develop a corresponding maintenance system according to the nature of the materials and production requirements. Regular maintenance is generally divided into minor repairs, intermediate repairs and overhauls.

1. Minor repair: Check the crusher spindle suspension device, dustproof device, eccentric bushing and bevel gear, lining plate, drive shaft part, thrust disc and lubrication system and replace the lubricating oil. The minor repair cycle is approximately 1-3 months.

2. Medium repair: The medium repair includes all the minor repairs; check and replace the lining if necessary; check and repair the drive shaft part, eccentric sleeve, inner and outer bushings, thrust disc, suspension device and electrical equipment. The overhaul period of the repair is about 6-12 months.

3. Overhaul: Overhaul includes all the contents of the repair; check and repair or replace the crusher frame, beam and repair foundation. The overhaul period is approximately 5 years.