How to remove dust from sand making machine

　　The hazard of dust is obvious to all. The dust generated in the daily work of the sand making machine will cause the motor to heat up, block the machine, and be the * hazard to the health of workers. Many industry workers will have occupational diseases in the industry at the end of their careers, so for stone quarry workers, respiratory diseases caused by dust are obvious hazards. So, today we will do a brief analysis on the dust removal and maintenance of the sand making machine.

　　At present, there are two commonly used dust removal methods for sand making machines, one is the sand making machine dust collector, that is, bag dust removal. The specific operation process is as follows. It is necessary to ensure the sealing of the sand making machine cabin, and then arrange dust removal points at suitable locations. Generally, the feed belt conveyor head, the * of the sand making machine, and the discharge belt conveyor tail are selected. Finally, a sufficient amount of air is introduced through the blower to blow the dust into the dust bag.

　　In addition, experienced engineers also recommended a dust removal method for sand making machines, belt conveyor dust removal, and its main working method is to spray water mist at the discharge port. There are several key points in this dust removal method: First, the semi-sealed nose and tail cover. The second is the belt and sealing cover of the discharge port. During the specific operation, special attention should be paid to observe the dust removal effect. If the effect is not satisfactory, the dust removal of the sand making machine should be realized by the combination of the dust collector and the belt conveyor dust suppression immediately.