How to maintain the sand washing machine can extend its life

As the auxiliary equipment of the sand production line, the sand washing machine adopts water washing to remove impurities in the materials. How to get good results and prolong service life of sand washing machine? We must do the following:

1, Special training should be given to the operators of the sand washing machine, to understand the structure and working principle of the washing equipment, and to control the operation process of the equipment proficiently. Although the operation of the sand washing machine is very simple, in practice, the operation of coarse branches and leaves should be s*ped to avoid the malfunction of the equipment operation caused by improper operation and shorten the service life of the sand washing machine.

2, Daily maintenance. Do not put irregular materials into the sand washer. After each use, please clean up the remaining mud in the bucket. Clean the sand and insist on ventilation and dryness to ensure that there is no debris when the machine is turned on again to ensure the normal operation of the equipment.

3, Derusting. The equipment material is generally stainless steel, but sometimes it is steel. If the material is steel and the environment of the sand washing machine is very harsh, it is easy to rust when it comes in contact with moisture. When the sand washing machine rusts, it must be cleaned up in time, otherwise it will cause the sand washing machine to age and shorten its service life.

4, Regularly check the sand washing machine to ensure the normal operation of the sand washing machine. Especially the smoothness of the smooth parts, the tightness of the V-belt, the level of gear matching and the operation of the dryer to check whether the machine can run stably.

5, Don't make the work load. In normal operation, please do not put too much material in the sand washer, as this will increase the workload of the sand washer and prone to malfunctions.
 
The disposal capacity of the wheel-type sand washing machine is relatively small, the amount of sand loss during the cleaning process is small, and it does not require the use of excessive water resources. It is usually suitable for small and medium-sized sand production lines. Sand washing machine is a kind of water washing equipment, so it cannot work without water. When choosing the location of the installation, please try to be as close to the water source as possible. For the sake of safety, the location where the sand washing machine is installed should have better engineering geological conditions as much as possible to prevent construction under faults, landslides and water levels.