We can do this to improve the efficiency of the cone crusher

Cone crusher is a mechanical equipment used for ore crushing on sand and gravel production line. Commonly used ore crushers on sand and gravel production lines are jaw crushers, cone crushers, impact crushers and other crushing machinery and equipment. Jiaozuo Zhongxin is here to introduce you how to improve the crushing efficiency of the cone crusher.

 In the production and crushing process of the cone crusher, if the crushed material needs to contain debris, it is easy to cause the cone crusher to block the material. Therefore, how to make the customer solve the problem by himself when encountering this situation, and realize the saving The time-saving effect, while also improving the utilization rate of crushed products.

1,To check the source of raw materials, pre-screen the materials that need to be crushed, and filter the materials that do not meet the crushing requirements.

2,Make sure that the material is dry before crushing. Before crushing, there are still some difficult-to-handle ores, such as screening, washing, ore blending, etc., to ensure the cleanliness of the material to control the moisture content before crushing. If there are still materials that cannot fall during the crushing process, measures should be taken to reduce the speed of the spindle and increase the discharge port. However, when adjusting the discharge port, if the angle cannot be adjusted peacefully, measures should be taken. For the cone crusher, the average particle size of the feed equivalent of the cone crusher is generally about half of the allowable feed size, so the number of material layers in the feed layer is about 2 layers. In this case, the crushing and processing output of the entire cone crusher can be increased.