How to deal with the material blocking of the crusher

The crusher is a necessary equipment for the stone production line, but due to improper operation in the production process, it may cause the problem of the crusher to block the material. How to solve this problem? Zhongxin technical engineers will introduce you to the common causes of blockage.

1. The blockage of the crusher in the stone production line is one of the frequently encountered failures, which is also related to the problems in the design of the machine, but a large part of it is caused by the improper use of the operator.

2. Too fast feeding speed and increased load are one of the reasons for blockage. So everyone must pay attention when using the crusher. During the feeding process, pay attention to the problem of the large deflection angle of the ammeter pointer. If the rated current is exceeded, it indicates that the motor is overloaded, and the motor will be burned out for a long time. When this happens, the feed door should be reduced or closed immediately, or the feeding method can be changed, and the feed amount can be controlled by increasing the feeder. There are two types of feeders: manual and automatic. The user should choose the appropriate feeder according to the actual situation.

The above is the common solution to the material blocking of the crusher in the production line. I hope it can help the majority of users. If you encounter other problems, you can also call Zhongxin heavy industry. Professional technical engineers will solve it quickly for you.